Thingiverse
Kinetic Extruder Visualizer Engine
von knickers
7.2k
Downloads
5.9k
Likes
19
Makes
Kinetic visualizer pistons for a more discernibly active extruder, inspired by extruder visualizers from other designers. Reciprocating Engine built to attach to your direct dive extruder motor. Can also attach to any motor which has screw holes in the corners.
The engine block is held in place by circular tabs that press fit into the screw holes of standard NEMA 17 stepper motors. The fit should be tight so the assembly holds itself in place securely. If the mounting tabs don't fit in your motor, edit the tab size in Thingiverse Customizer.
The crankshaft requires a neodymium magnet to hold itself to the stepper motor shaft, **8 mm** diameter by **3 mm** tall.
*Edit: November 18th 2021*
Added pre-rendered cylinder configurations, one for each type, all with 0.3mm tolerances. Not including the propeller.
*Edit: June 26th 2020*
Added different cylinder configurations and a configurable propeller. These are not provided as pre-rendered STLs, make them in customizer. Choose
The engine block is held in place by circular tabs that press fit into the screw holes of standard NEMA 17 stepper motors. The fit should be tight so the assembly holds itself in place securely. If the mounting tabs don't fit in your motor, edit the tab size in Thingiverse Customizer.
The crankshaft requires a neodymium magnet to hold itself to the stepper motor shaft, **8 mm** diameter by **3 mm** tall.
*Edit: November 18th 2021*
Added pre-rendered cylinder configurations, one for each type, all with 0.3mm tolerances. Not including the propeller.
*Edit: June 26th 2020*
Added different cylinder configurations and a configurable propeller. These are not provided as pre-rendered STLs, make them in customizer. Choose
knickers veröffentlicht auch auf
18 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
