King from Tekken - HueForge

Project: king final.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 193.01x195.78mm in sizeYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 1.8mmFilaments Used: (* = Owned) #c00d1e * PLA BambuLab Basic Red Transmission Distance: 4.2 #ffffff * PLA BambuLab Matte Ivory White Transmission Distance: 3.6 #000000 * PLA BambuLab Matte Charcoal Transmission Distance: 0.1 #5e43b7 * PLA BambuLab Purple Transmission Distance: 1.7 #777b78 * PLA Sunlu Meta Grey Transmission Distance: 2.1 #0086d6 * PLA BambuLab Basic Cyan Transmission Distance: 2 #4c5f71 * PLA BambuLab Basic Blue Gray Transmission Distance: 1.5This print uses 7 unique filamentsSwap Instructions: Start with Red At layer #8 (0.48mm) swap to Ivory White At layer #17 (0.84mm) swap to Charcoal At layer #21 (1mm) swap to Purple At layer #23 (1.08mm) swap to Grey At layer #29 (1.32mm) swap to Cyan At layer #32 (