King

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can change X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 6 unique filaments. Substitute as you see fit. Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #11 (0.96mm) swap to Dark Brown At layer #12 (1.04mm) swap to Gray At layer #15 (1.28mm) swap to Jade White At layer #18 (1.52mm) swap to Dark Brown At layer #21 (1.76mm) swap to Yellow for the rest.