King

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Matte Dark Brown Transmission Distance: 2PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 6 unique filaments. Substitute as you see fit. Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Blue GrayAt layer #11 (0.96mm) swap to Dark BrownAt layer #12 (1.04mm) swap to GrayAt layer #15 (1.28mm) swap to Jade WhiteAt layer #18 (1.52mm) swap to Dark BrownAt layer #21 (1.76mm) swap to Yellow for the rest.Boost MeGot a Boost to spare? Every little bit helps the