Kit flowerpot Posko - Gapok

Recommended material
PLA (PETG optional)

layer height
0.20mm standard
0.16 mm for better groove definition

Nozzle
0.4mm
0.6 mm optional for greater rigidity

Perimeters
3 walls
Approximate thickness 1.2 mm

Stuffed
10 to 15 percent
Gyroid or Cubic pattern

Lower layers
4 to 5 layers
On a rounded base use 6 layers

Upper layers
0 layers

PLA Temperature
Hotend 200 to 210 °C
First layer +5 °C
Bed 55 to 60 °C

Fan
First coat 0 to 30 percent
From layer 3 to 100 percent

Speed
External perimeter 30 to 35 mm/s
Internal perimeter 40 to 50 mm/s
First layer 20 mm/s

Supports
Do not use supports

Orientation
Print with the base resting on the bed

Bed Adhesion
Brim of 3 to 5 mm recommended
Optional skirt

Use with water
Seal the interior with acrylic varnish or resin
Alternative printing in PETG