Thingiverse
Kitchen Backsplash
door PT-Designs
122
Downloads
112
Likes
0
Makes
This is a simple backsplash for a kitchen to protect the wall while cooking.
The tile patterns are achieved through setting the initial layer pattern to concentric --> See instructions.
This should be printed from ABS because of the heat that comes from the pan etc., PETG could work if the distance from the pan is big enough but I've not tested it.
Each individual tile was welded with a 3D Pen to the following tile, for more information scroll down to instructions.
The size of the tiles are:
Big: 150x150mm
Small: 150x50mm
If you want smaller tile, simply scale them down in your favorite slicer.
The tile patterns are achieved through setting the initial layer pattern to concentric --> See instructions.
This should be printed from ABS because of the heat that comes from the pan etc., PETG could work if the distance from the pan is big enough but I've not tested it.
Each individual tile was welded with a 3D Pen to the following tile, for more information scroll down to instructions.
The size of the tiles are:
Big: 150x150mm
Small: 150x50mm
If you want smaller tile, simply scale them down in your favorite slicer.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!