Thingiverse
Kitchen Sponge Holder
di odacharlee
9
Download
4
Likes
0
Makes
This is a sponge holder designed for my household.
**Feature**
This sponge holder is designed to be placed against the wall above the sink.
It can hold one brush, one or more sponge, and some other small tools like steel wire balls.
The bottom is inclined so that water will not stay in the box and run down and out from the drain holes at the bottom.
**Print Settings**
No support is required.
I used 0.28mm layer height since household items do not require high quality. Print speed is 100mm/s. This will drastically reduce the print time from 30+ hours to approximately 15 hours.
**Feature**
This sponge holder is designed to be placed against the wall above the sink.
It can hold one brush, one or more sponge, and some other small tools like steel wire balls.
The bottom is inclined so that water will not stay in the box and run down and out from the drain holes at the bottom.
**Print Settings**
No support is required.
I used 0.28mm layer height since household items do not require high quality. Print speed is 100mm/s. This will drastically reduce the print time from 30+ hours to approximately 15 hours.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
