KitchenAid compatible wall mounts

This is a series of KitchenAid mixing accessory hangers for attachment to walls or cupboard doors. In my use case, I attached them to the back of a pantry door to keep the attachments accessible but out of the way. Three sizes are included for the paddle (35mm diameter), dough hook (95mm diameter) and whisk (135mm diameter) attachments. Using the appropriate model will reduce bending moment - but it probably doesn't matter.

For each hanger you will need:
* a length of 6.35mm diameter (1/4 inch) dowel between 15 and 24mm long. It works better if it is closer to 24mm. I used aluminium rod, but you may also use wood or try printing your own.
* a large 3M Command strip, or you could screw using the lateral stabilisers (the 'ears' on the model).

To assemble, I had to use handtools to clean the holes through which the pin/axle sits, and also to ensure a relatively smooth (but not perfect) attachment surface on the shaft. I also used a handclamp to press-fit the pin through the parts,