KitchenAid tool holder

Hej,
i’d like to introduce you to best version of a KitchenAid tool holder. It works just like the original holder on your KitchenAid.

You need a spring (1,4mm x 20mm x 60,9mm) or some similar. I cut it into three equal peaces with an angle grinder. And i used some glue to fix the spring to the bottom part. The other stuff is a cylinder head screw (M4 x 40mm), a washer (inner hole (/) >12mm and outer circle (/)> 20mm) and the M4 screw nut.

You can probably also use a hexagon head screw (M4 x 40 ore more) and use a M4 drive-in nut to fix it some were in an angel of 90°. in this case you don’t need the bottom part. But I haven’t tried that.

At the Hornbach market you can buy the parts individually and not in 100 pack.
Have fun and best regards

https://www.hornbach.de/shop/Druckfedern-Edelstahl-A2-21-2x60-9x1-4-mm-25-Stueck/6852039/artikel.html

https://www.hornbach.de/shop/Kotfluegelscheibe-13-x-30-mm-galv-verzinkt-100-Stueck/3840897/artikel.html

https://www.hornbach.d