Thingiverse
Kitsune Fox Mask
door Stonemasks
1.5k
Downloads
1.5k
Likes
15
Makes
A model of a fox mask that can be painted similar to Tanjiro's or Giyu's mask from Kimetsu no Yaiba
Tanjiro mask is the regular stl, Tanjiroflat has a flat bottom for easy printing/bed adhesion.
Tanjirocolour and Giyucolour are OBJ files with vertex colours.
I also included the Zylinder and Eye Rings files for people that want to print stuff for covering the eyes.
The eye rings are simple rings that you can print in black, adjust the z height to your liking and make sure your line width is compatible with the model. If you want to glue it to some mesh for the eyes Id recommend doing that while the rings are stuck to the build plate.
Example for the Cura-slicer:
If you also want to print the eye mesh you can use the Zylinder file. Print the eye rings with a low z height like 0.2mm and keep them stuck to the build plate. Place the Zylinder file on the same spot on the buildplate in Cura and slice it with the Raft build plate adhesion setting and set Raft Extra Margin to 0
Tanjiro mask is the regular stl, Tanjiroflat has a flat bottom for easy printing/bed adhesion.
Tanjirocolour and Giyucolour are OBJ files with vertex colours.
I also included the Zylinder and Eye Rings files for people that want to print stuff for covering the eyes.
The eye rings are simple rings that you can print in black, adjust the z height to your liking and make sure your line width is compatible with the model. If you want to glue it to some mesh for the eyes Id recommend doing that while the rings are stuck to the build plate.
Example for the Cura-slicer:
If you also want to print the eye mesh you can use the Zylinder file. Print the eye rings with a low z height like 0.2mm and keep them stuck to the build plate. Place the Zylinder file on the same spot on the buildplate in Cura and slice it with the Raft build plate adhesion setting and set Raft Extra Margin to 0
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
