MakerWorld
Organizers
Zum Modell
Klein Tools Precision Bit Driver MultiBoard Holder
66
Downloads
20
Likes
24
Makes
This is a MultiBoard mount for the Klein Tools 39 Piece Precision Screwdriver Set (32717). It uses 2-3 MultiConnect connectors to mount to Multiboard. There are several options to choose from: Blank Front, Embossed Text Logo, Embossed Round Logo, Dual Color Text Logo, and Dual Color Round Logo. The dual color logo options are on separate plates that are glued on to reduce filament waste. For printing the holder I used a 0.4mm nozzle, with the 0.20mm Standard profile, with 3 wall loops and Cross Hatch infill. The Dual Color Text Logo used 2 wall loops with ironing on the top surfaces and a color swap at layer 5. Due to the fine detail, the Dual Color Round Logo requires a 0.2mm nozzle. For this one, I used the 0.10mm Standard profile with 0.18mm line width and a color swap at layer 9. The holder with the Round Embossed Logo can use the same settings as the ot
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
