KlicLok base

3d printed base to attach ‘toys' to ‘machines’ via a KlicLok connector. If your toys don't have a connector or suction cup, you can use elastic bands, cable ties or velcro to attach your toy to this adapter using the well documented methods. To print:It's highly recommended you use a stronger polymer like ABS or ASA with more sidewalls and infill than default, but only you know how much force is going to be on this adapter so use at your own risk.Print with the narrow end on the plate and the wide end at the top (like a mushroom!)To assemble you're going to need:1x M8x1.25 bolt - 20mm2x 30mm or 1 ¼ inch washers1x 30mm rubber washer (you may be able to skip this)1x M8x1.25 coupling nut - 30mm1x KlicLok threaded adapter from Hismith - you can unscrew it from an existing toyTo assemble:Put the parts together in order in the photo.Fully tighten the KlicLoc adapter, using threadlocker if desiredTighten the 20mm M8 bolt, using threadlocker if desired. Do not over tighten as y