KLP1 LED light bar housing + diffuser

KLP1 is a good printer and packed with nice features, Sadly the acrylic panels are tinted which make things hard to see. I made LED housing and diffuser for any 8mm LED strip, instead of buying the kit from Kingroon, you could buy a quality LED strip and print your own housing. The housing has 4 holes on each corner to feed the power wires for more convenience. I recommend COB LED strip for more uniform light. https://www.aliexpress.com/item/1005006358747304.html Use quality double-sided tape to fix the housing on the panel under the XY belts like the picture #3 LED specs: must be 24V to connect it directly to the power supply, or use 12V or 5V LED with DC-DC converter Optional stuff:  24V PWM controller for dimming the LED or button https://www.aliexpress.com/item/1005006361884484.html inline fuse (to prevent accidental shorting) https://www.aliexpress.com/item/1005005471789734.htmlorhttps://www.aliexpress.com/item/32691175691.html The provided installation picture is from the Official Kingroon not mine, always check your powersupply, don't attempt if you are a novice. Print Settings: LED housing 0.2 resolution 15% infill supports on LED diffuser 0.2 resolution 10~15% infill ironing top layer