Knife display stand

Flexible knife stand for storing your folding knives. I designed this to fit in an olden wooden box that I already had but it also works as a stand alone. Requires 5/32" rod (see pic) to keep everything together.

The "rests" come in different widths (in mm in the file name). I find that 15mm is good for most knives, but sometimes you need something thicker or thinner. Separate the "rests" with the "end caps". There are holes in the end caps for two 5/32" rods. There's one hole in the rests, which rest on top of the other rod. See picture if that isn't clear.

The holes are pretty tight. I actually ran them all through with a 5/32" drill on the drill press which resulted in an excellent fit for the brass rod I was using.