Knuckles - Classic

Knuckles, a character from Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka. Knuckles is a red anthropomorphic short-beaked echidna who is Sonic's secondary best friend and former rival. Determined and serious, but sometimes gullible, he fights his enemies using brute force and strength.  Only one piece requires support, head. See notes on how I set up my slicer supports for this part.  If you have the proper filament colors, no painting is needed. The assembled model is 176mm tall and is in proportion to my other characters from the Sonic series. Note: This is the classic version of Knuckles. Enjoy! ........................................................................................................... Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback. Special thanks to Jason McMillan (makerworld ID Gatekeeper) for creating the Bambu Print Profile on Makerworld. ........................................................................................................... **Print Instructions:** Supports: No (except for one piece, head) Resolution: .2mm (see below for printing tips suggested optional exceptions) Infill: 15% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... **Building the model** Colors Black: (Paramount3D PLA - Black) eye_black_right eye_black_left nose .. Skin: (Paramount3D PLA - Universal Beige) face .. Yellow: (Devil Designs PLA - Bright Yellow) shoe_yellow_right shoe_yellow_left .. Gray: (Parmount3d PLA - Prototype Gray) buckle_right buckle_left sole_left sole_right .. Red: (Hatchbox PLA - True Red) shoe_front_left shoe_back_left shoe_front_right shoe_back_right head (see below for support requirement) body (see notes for recommended slicer parameters) tail .. Green: (Hatchbox PLA - True Green) cuff_left cuff_right .. White: (D