MakerWorld
Hueforge & Lithophane
Go to Model
Knuckles from Sonic the Hedgehog
86
Downloads
62
Likes
62
Makes
For FREE *exclusive* models visit my Patreon (in bio or http://patreon.com/JustBe3D) also if you are interested in members only models, or a commercial license to sell your physical prints of my models.. Can be rescaled just remember not to change the Z axis.I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.I put a single layer of black under my red. I think it makes the red look deeper and move vibrant, But it is not required.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA Overture Space Gray Transmission Distance: 1.4PLA Overture White Transmission Distance: 4PLA Overture Red Transmission Distance: 8.2Swap Instructions:Start with BlackAt layer #13 (1.12mm) swap to Space GrayAt layer #17 (1.44mm) swap to WhiteAt layer #21 (1.76mm) swap to BlackAt layer #22 (1.84mm) swap to RedAt layer #29 (2.4mm) swap to White for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!