MakerWorld
Hueforge & Lithophane
Ver Modelo
Kobe Bryant
33
Descargas
24
Likes
22
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA Kexcelled Dark Yellow Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Brown At layer #18 (1.52mm) swap to Dark Yellow At layer #24 (2mm) swap to Jade White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
