Kobo Libra Colour Case (Stylus version)

Kobo case compatible with Kobo Libra Colour, Kobo Libra 2, Tolino Vision Color, Tolino Vision 6. You can use the case with or without Kobo Stylus. You can take ereader from the case without taking out the Stylus by holding on stylus via stylus slot. Or you can take both out since the magnet holds them together. You can also take out only stylus. It also has slit for charging cable and taking out ereader. I printed it with 90A TPU (3DTrcek). It's not perfect, but close to it. You will probably get better results with 95A TPU. PLA and PETG may work, but not tested. It's snug fit (slide in), and it should fit even with non-flexible material, although it will be a very tight fit. Feel free to improve it. If I printed it again: I would add another support, especially for the back part, since TPU on this height can get wobbly. I would probably make a thicker back panel to make it print better, the same thickness as I made the front panel to protect the screen. And make sure you dry y