Kobra 3 Dial Gauge Mount

Kobra 3 Dial Gauge Mount Could directly connected to dial gauge with the original screws. Also added a gcode script to automaticaly move the bed 4 times to the front, middle and back with the extruder centered on the x-axis. Then the extruder will go to the left side so you can place the dial gauge in the center and it will go 2 times to the front, middle and back so you can mount the dial gauge to measure and level the hotbed. After every move there's a pause of 10 seconds. You can edit the gcode file to change the pause time, change the position of the print head. When you want to use the script you need to change .txt to .gcode and put it on a USB stick and plug into your Kobra 3. Only works when Ace pro is connected and turned on. You will get an error code but you can click resume then select filament slot.