Kobra 3 LED Light Support

Let there be light! I was so frustrated that the printer has no light and the camera LED's didn't work. Unlike some other supports this works with full height models and very cost effective. The print head does not crash into the LED light or supports for tall models. So I designed this support for a 5Volt LED bar with a power switch. It draws 900mA. Plugs into the second or third USB plug instead of the flash drive or the camera plug works too. Support says for what it's worth: Typically, a standard USB 2.0 port can provide up to 500mA, while a USB 3.0 port can provide up to 900mA. If you have any other questions or need further assistance, feel free to ask.    The LED light bar today is less that $5.00 at Amazon but varies Affiliate Link: https://amzn.to/40rqAaD Look here for combs to keep your PTFE tubes in place. https://www.makeronline.com/en/model/PTFE%20support%20combs%20for%20Kobra%203%20ACE/46840.html Please comment and give a like if you like what you see. If you see something you think might need modifying comment and I will see what I can do for you.