KOBRA 3 MAX ADJUSTABLE CAMERA

This is an improved camera mount for the stock USB Anycubic Kobra-3 camera with a larger opening for use with the Kobra 3 max. There are a few variants of circuit boards for the camera. If the fit is too tight then you can scale the housing and cover in the slicer to fit your model. It attaches to the Y-axis with a screw in the same way as the stock camera model The camera angle can be adjusted by means of the ball joint and is easier to print. The camera mount also has a cable guide for the USB camera wire. Tolerances are tight as some parts are press fit. I recommend using PLA. The housing is somewhat of a tight fit. You have to disconnect the USB connector prior to inserting the PCB and also insert the PCB at an angle to get it past that top notch. Insert it at an angle with the lower end being the side opposite the opening. Once inserted you can connect the USB connector. Assembly is very easy and self-evident. 3d Printing A Print profiles is included. Print with "Tree manual" support Tolerances are tight as some parts are press fit. I recommend using PLA Minimal support is required. I recommend you use the print profile. About me   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you. DISCOUNT CODES FOR ANYCUBIC PRINTERS AND FILAMENT Here are some discounts codes that you can use to save on filament and printers. Note the discount codes may not work with already discounted items. Thank you ANYCUBIC STORE DISCOUNT CODES United States site $10 off orders over $100 | Coupon code: Darren3dPrint1