Kobra 3 Max Nozzle Holder

Needed a Nozzle for holding my Kobra 3 Max Nozzles. They don't have stamping on the nozzles so I labeled the slots so I can keep track. Print with 0.4 nozzle and .16 resolution Solid. I used PLA and it was fine. Other materials may be stronger. I drilled my own .6mm and .8mm nozzles. I made a video here. I'm having a hard time uploading the parameters So here are some basics If you find this useful please buy me a coffee! https://buymeacoffee.com/startupchuck for .6mm nozzle use .3 layer height and .62 line widths for .8mm nozzle use .4 layer height and .82 line widths for .8mm nozzle use .6 layer height and 1.23 line widths The machine settings must be created with .6mm and .8mm nozzles also to match. For PLA Plus I used 22mm^3/s for flow rate and .8mm nozzle.