Kobra 3 Printhead (Back piece)

Recommendation <= 0.2 mm layer height lay flat orientation use high temp material such as abs pc or other use the original screw from the orignal print head use support blocker to prevent the support to go into screw hole Message from DuckDoCad do this at your own risk part may have measurement mistake feel free to remix but pls give credit **This is not official stl** the orignal part is better than this Have fun yayyy Link for the Printhead front piece https://www.makeronline.com/en/model/Kobra%203%20Printhead%20(%20Front%20piece)/32046.html