Kobra S1 First Layer Test

Here’s a model description you can use: First Layer Quality Test Model – 250x250x0.02mm This is a large, ultra-thin first-layer test print designed for the Anycubic Kobra S1 (or other printers with a 250x250mm bed). The model is a flat 250x250mm square with a thickness of just 0.02mm, allowing users to evaluate bed leveling, extrusion consistency, and adhesion quality across the entire build plate. Key Features: ✅ Full Bed Coverage: Ensures uniform calibration across the entire print area. ✅ Ultra-Thin Layer: Helps detect inconsistencies in first-layer adhesion and extrusion. ✅ Fast Print Time: Prints quickly, making it ideal for rapid testing and fine-tuning. ✅ Ideal for PLA, PETG, ABS: Works with multiple filament types to check adhesion performance. Recommended Print Settings: Layer Height: 0.2mm Nozzle Temp: Based on filament type (e.g., 200°C for PLA) Bed Temp: Adjust according to filament (e.g., 60°C for PLA) Speed: 20-30mm/s for optimal first-layer adhesion Flow Rate: Adjust if necessary to prevent gaps or over-extrusion This model will help fine-tune your Anycubic Kobra S1 for flawless first-layer prints! 🚀