Kobra S1 Slim Riser with LED lighting

Following my popular S1 Combo Flip Riser here, this is a riser only version so you can enjoy the rest of features below, without ACE pro. This model is 12mm high on top of a S1 printer. You will need just 193g of filament for all parts.   7/02/2025: I released a new light bar that goes with this riser, click here to view the photos of better lighting at print head. Key Features:  Slim Design: my minimal design not just saves material and printing time, but requires minimal space on top  Top Panel Sliding and Tilting for Ventilation: this model support stable backward sliding or tilt up as preferred   Raised Touchscreen: it is easier to do maintenance as the touchscreen can fold flat and is not in your way  LED light Mounting: the LED mount is designed to illuminate downward to prevent glaring  Accessory Attachment: the side rails allow you to attach printer accessories such as external spool holder, side panel, etc.   Side Spool Mount: this model includes a folding side spool mount as example to encourage other attachment designs  Secure Mounting: this riser is designed to use permanently attached to the printer using screws to provide stable base for side attachments  Cable Management: the groove at the back left corner helps LED light strip power cable routing  No Support Printing: this model is designed for easy printing without support No Damage Assembly: this model does not require any additional hole for attachment Printing Suggestion: My original 3mf profile includes print settings that I tested and confirmed PLA/PLA+ is recommended  If you choose to use other materials such as PETG, make sure to account for shrinkage as it may not fit and not assemble/function properly Hardware for assembly: Touchscreen Riser - M3 20 mm hex head cap (or button head) screws x 2 LED holder - M3 10 mm countersunk screws x 4 - For LED strip, I used 12 mm width one. You may use a typical 10 mm wide strip as well. Top Panel Riser  - M3 8 mm countersunk screws x 2 - M3 10 mm (or 12