Kobra S1 Vented LED Riser with External Power

Ι wanted:  A vented riser so I can print with the door closed and not fuss with the lid  The ability to have the ACE on top without being too tall (because I’m a shorty)  The ability to add LEDs with an external power switch  To match the riser on my Elegoo as closely as possible  I used the Sturdy Riser by 3D-Druckbude on my Elegoo heavily for inspiration but since the Kobra S1 top and lid are 100% different from the Centauri Carbon, I had to start from scratch. About 3 weeks of designing, testing, and tweaking later, I think it's perfect. :) I've included a PDF with more details, parts/hardware, assembly, and wiring instructions. The LED groove is 10mm tall and the slider knobs can be tightened to prevent rattling.  Required hardware:  16 M3 x 12 socket head screws (You can use self-locking nuts but if so, use M3 x 16 screws instead)  16 M3 nuts Optional parts I used:  LED lights: https://a.co/d/4tMub35 24 VDC power supply: https://a.co/d/77hrxqw  Switch: https://a.co/d/dVovAER  22 gauge wire: https://a.co/d/iiTmK7h  Splice: I had this type on hand, but you can use any type https://a.co/d/1TlJAgM  Heat shrink UPDATE: It's a bit awkward to reach the slider knob on the back with the printer against the wall so I'm gonna work on a solution for that. I'll add it to this post when it's ready. A "long knob" has been added.