Koi Carp Hueforge

If you don't have ams, change “color switch” to “pause”. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:SUNLU BlackSUNLU SilverKingroon GreySUNLU WhiteThis print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions:Start with B