Kossel Base Stand

Additional base stand for Anycubic Kossel Linear (and possibly for similar Kossel printers with 20mm extrusions) which raises the whole printer by 52mm, to provide clearance for a 50mm tall power supply (or additional space for the electronics).

Update: 01/03/18 - I've added two taller versions with 75mm height and 100mm height, for those who need more clearance for their electronics. Also uploaded a SketchUp file for ease of editing.

There are two 4mm mounting holes to attach it to the printer (with M4x10 screws and nuts), and a rebate with three 3mm holes on two sides designed for side panels up to 4mm thick to be fitted. It also has an opening to allow the end-stop wires to be run down the central hole in the tower extrusions.

There's also a 3.5mm through hole which I tapped with an M4 thread, so that a base panel could be attached with three countersunk M4 screws.

If the machine has 240mm extrusions, the side panels would need to be 240x52mm. There are three 3mm mountin