Thingiverse
Kossel Clear Standoff
door acyron
21
Downloads
13
Likes
0
Makes
***I made this to small you will have to take the extrusion off to slide it on or cut off the nubs. Sorry I just received my kossel clear to test this.***
A simple design to allow the KC to be laid on its side without damage. However this should work for any delta style with 15/15 extrusion. This should also allow for easy shipping/packing a delta for carry or insert a 1/2 x 1/4 inch neodymium magnet into the slot to attach acrylic sheet for a build chamber. This is symmetric so it will work in any orientation.
This is my first design in so there my be a few issues to watch out for.
1) I don't have my KC yet so the measurements were taken of the incomplete sketchup file BELs released so some measurements my be off i.e. the standoff my need to be taller to prevent damage to the acrylic parts.
2) The screw holes will need to be drilled to match the screws (I don't know what size fits the slot nuts).
3) The locking "bumps" may be to tall or the plastic not give enough to
A simple design to allow the KC to be laid on its side without damage. However this should work for any delta style with 15/15 extrusion. This should also allow for easy shipping/packing a delta for carry or insert a 1/2 x 1/4 inch neodymium magnet into the slot to attach acrylic sheet for a build chamber. This is symmetric so it will work in any orientation.
This is my first design in so there my be a few issues to watch out for.
1) I don't have my KC yet so the measurements were taken of the incomplete sketchup file BELs released so some measurements my be off i.e. the standoff my need to be taller to prevent damage to the acrylic parts.
2) The screw holes will need to be drilled to match the screws (I don't know what size fits the slot nuts).
3) The locking "bumps" may be to tall or the plastic not give enough to
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
