Thingiverse
KP3S Spool Holder (Supportless)
par senhorbento
5
Téléchargements
8
Likes
0
Makes
A simple spool holder to Kingroon KP3S.
You will need 2 M5 screws or bolts
**Don't need a nut.**
**You can print all the parts at once.**
Consider rotate to upside-down the "base.stl" file.
Consider put one of the minor faces of the "eixo.stl" file in contact with the plate.
The 4th image show the best positions
**I highly recommend use at least 10 lines of brim.**
You will need 2 M5 screws or bolts
**Don't need a nut.**
**You can print all the parts at once.**
Consider rotate to upside-down the "base.stl" file.
Consider put one of the minor faces of the "eixo.stl" file in contact with the plate.
The 4th image show the best positions
**I highly recommend use at least 10 lines of brim.**
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
