Kratos

KratosProject: kratos2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.6mm and the Actual Depth is 3.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Dark Brown At layer #18 (1.52mm) swap to Blue Gray At layer #21 (1.76mm) swap to White At layer #29 (2.4mm) swap to Red At layer #42 (3.44mm) swap to Jade White for the rest.