Thingiverse
Kriss Vector Shroud
par MakinBug
103
Téléchargements
84
Likes
1
Makes
Kriss Vector Shroud designed but not printed yet.
Dimensions have been checked with two different Krytac Vector owners.
Print the 14mm adapter and "But" first to check if it fits.
The main body is 360mm high. The total length when fitted will be 388mm.
You will need:
1x 16mm
1x 10mm
1x 6mm
No.4 Self Threading screws.
No supports needed. The "Body" has an inner brim which has to be cut b4 assembly.
"Important"
If you are planning to print in PETg please use the files with PETg in the title. They have an engraving to help with recycling at the end of life.
Dimensions have been checked with two different Krytac Vector owners.
Print the 14mm adapter and "But" first to check if it fits.
The main body is 360mm high. The total length when fitted will be 388mm.
You will need:
1x 16mm
1x 10mm
1x 6mm
No.4 Self Threading screws.
No supports needed. The "Body" has an inner brim which has to be cut b4 assembly.
"Important"
If you are planning to print in PETg please use the files with PETg in the title. They have an engraving to help with recycling at the end of life.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
