Thingiverse
Electronics
Model downloaden
Ksger T12 Case
66
Downloads
67
Likes
1
Makes
This is my KSGER T12 soldering station based on KSGER STM32 controller & cheap 24v/4a power supply from eBay or AliExpress.
All parts are designed to print without support.
Hardware:
- M3 x 10mm long bolts (8mm long will work too)
- M3 nuts
- M3 x 10mm long self tapping screws
- KSGER T12 STM32 controller v3.1
- AC-DC24 power supply
- IEC320-C8 2 pin or IEC320-C14 3 pin (recommended) power connector
- 16mm round switch
All parts are designed to print without support.
Hardware:
- M3 x 10mm long bolts (8mm long will work too)
- M3 nuts
- M3 x 10mm long self tapping screws
- KSGER T12 STM32 controller v3.1
- AC-DC24 power supply
- IEC320-C8 2 pin or IEC320-C14 3 pin (recommended) power connector
- 16mm round switch
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
