Thingiverse
Kulp K32A-B Mounting Base
von PHOENlX
0
Downloads
4
Likes
0
Makes
TO DOWNLOAD THE STL FILES, PLEASE VISIT MY WEBSITE - [SFL-DESIGNS.COM](https://sfl-designs.com/?store-page=General-Design-STL-Files-c132446135)
This is a base/wall mount for a [Kulp K32A-B](https://kulplights.com/product/k32a-b/). This mount was designed to hold the K32A-B with the Beaglebone Black, but can be used to hold just the K32A-B as well. The mounting posts were designed to use a McMaster Carr Thread-Forming screw number [96817A421](https://www.mcmaster.com/96817A421). If you are using the Beaglebone black, you will need 8 of these screws, and 6 if you are not using the Beaglebone black.
The hole provisions to mount the bracket to the wall are 4mm in diameter.
Have a suggestion for a mounting clip? Don't be afraid to contact us on our Facebook page, or send us a message here!
www.facebook.com/siskfamilylightshows
Like my designs? Help support us by donating to our show!
Thanks for looking at and supporting my designs!
This is a base/wall mount for a [Kulp K32A-B](https://kulplights.com/product/k32a-b/). This mount was designed to hold the K32A-B with the Beaglebone Black, but can be used to hold just the K32A-B as well. The mounting posts were designed to use a McMaster Carr Thread-Forming screw number [96817A421](https://www.mcmaster.com/96817A421). If you are using the Beaglebone black, you will need 8 of these screws, and 6 if you are not using the Beaglebone black.
The hole provisions to mount the bracket to the wall are 4mm in diameter.
Have a suggestion for a mounting clip? Don't be afraid to contact us on our Facebook page, or send us a message here!
www.facebook.com/siskfamilylightshows
Like my designs? Help support us by donating to our show!
Thanks for looking at and supporting my designs!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!