KVM switch button mount

A holder designed to hold the 'switch computers' button from a KVM (HDMI and USB) switch and allow it to be screwed to the underside of a desk or a wall. My KVM switch is VPFET-branded, but folks on reddit report that this works for other similar Chinese KVMs from other random brands.

There are 3 versions. One has screw holes at all four corners while the two others omit a hole on one front corner or the other - if you are putting this under a desk pick the one without a screw on the corner from which your finger will be reaching; makes it a bit nicer-feeling to use.

I printed this with 20% infill at 0.2mm resolution. The infill level won't matter much as the structure is almost entirely walls, anyway. You *must* enable supports to print this. I recommend printing this in the default orientation with the main plate with the hole in face down on the bed - then you just need to snap off three little supports under the screw holes.