Cults3D
Gadget
Zum Modell
Kyosho Diff Locker
0
Downloads
0
Likes
0
Makes
This is a diff locker for many Kyosho RC models that use the same differentials, like the Inferno and Mad Force etc.
I made 2 variations so you can print what you prefer.
#1 diff lock
#2 diff lock - no nubs (no supports required)
How to use:
Print out your favorite design.
Open your diff, take out the gears and oil.
Put the printed object inside the diff housing instead of the gears.
Make sure you didn't remove the pins from the output shafts.
Make sure the pins are centered and go into the holes in the printed object.
Be sure everything is flush and nothing is protruding before attaching the outer gear during reassembly.
Enjoy
I made 2 variations so you can print what you prefer.
#1 diff lock
#2 diff lock - no nubs (no supports required)
How to use:
Print out your favorite design.
Open your diff, take out the gears and oil.
Put the printed object inside the diff housing instead of the gears.
Make sure you didn't remove the pins from the output shafts.
Make sure the pins are centered and go into the holes in the printed object.
Be sure everything is flush and nothing is protruding before attaching the outer gear during reassembly.
Enjoy
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
