L-Boxx Mini Insert for Wera Tools

L-Boxx Mini Insert for Wera Tools. Especially designed to take up the following tools:

1x bitholding screwdriver 813(R)
1x bitholding screwdriver 816(R)
1x ratchet 1/4" Zyklop Mini
1x bit holder Rapidaptor
32x long bits (length: 89 mm)
30x short bits (length: 25 mm)
7x sockets (5.5 / 6 / 7 / 8 / 10 / 12 / 13 mm)

Printed parts needed:

1x Bottom.stl
1x Top.stl
2x Left_Right.stl
2x Lid.stl

Additional parts needed:

6x M3 insert nut (outer diameter: 4.6 mm / length: 3 mm)
6x M3 countersunk screw (length: 20 mm)
6x M3 washer (outer diameter: 7 mm)
1x Double-sided tape

Assembly:

1. Insert M3 nuts into bottom part (Bottom.stl) on the opposite of each screw hole
2. Attach left and right holder (Left_Right.stl) using 4 screws and 4 washers
3. Attach top part (Top.stl) using 2 screws and 2 washers
4. Attach the two spacers (Lid.stl) to the lid of the L-Boxx Mini using double-sided tape
5. Put insert into L-Boxx Mini