lab in wilderness

Project:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Sunlu Matte White Transmission Distance: 5This print uses 2 unique filaments Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to White for the rest.labdogshunter