Thingiverse
Laboratory Probe Bypass
von jonchen727
8
Downloads
10
Likes
0
Makes
A small form factor pH/EC/DO/ORP holder and bypass to use your standard 0.5 in diameter probes as inline probes.
The top is made to be tapped or screwed into with 1/2" NPT Fast n Tite connectors to allow a probe to be inserted into the housing.
The inlet and outlet holes are to be tapped to 1/8" NPT quick connect fittings for hosing.
The inlet hole is the bottom hole on the side it then fills up the first probe housing and overflowing into the bottom of the second probe housing, ensuring that both sensors are submerged with liquid.
The top is made to be tapped or screwed into with 1/2" NPT Fast n Tite connectors to allow a probe to be inserted into the housing.
The inlet and outlet holes are to be tapped to 1/8" NPT quick connect fittings for hosing.
The inlet hole is the bottom hole on the side it then fills up the first probe housing and overflowing into the bottom of the second probe housing, ensuring that both sensors are submerged with liquid.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!