Lack Enclosure

This is a collection of printed parts I used to make enclosures for my printers. One was printed in PETG, the other in PLA. The wire outer stand has a larger opening should you decide to relocate the RAMBO box outside the enclosure. Otherwise, use the cord stand if the power supply is the only thing outside the enclosure. I recommend printing the light top and plate in a reflective color such as silver.

In addition to these parts you will need:

2x IKEA Lack Tables
4x Sheets of plexiglass (I used 17.25x19.25x0.11 inch sheets)
Insulation strips (to close gaps with plexiglass)
LED light strips
32x #8 x 1in wood screws
Cabinet Hinges
Cabinet latch

The LED light is attached to the top by the holder with 3M Command strips with the light itself snapped in place by the holder. The power supply and RAMBO holders are hung off the leg with 1 screw each (same #8 as above). Please note that the MK2 and MK3 use different cases so print the correct one.

I've also included the MMU 2