Thingiverse
Lack Enclosure
by jonseejon
13
Downloads
13
Likes
0
Makes
Created in Tinkercad, view the model there for dimensions and notes.
https://www.tinkercad.com/things/1RohGqORfMU
This is an enclosure that will fit the Ender 3 Pro with the filament spool on the shelf below the printer. This has been drawn in millimeters to fit within the Tinkercad grid, but is actually in inches (scale up by a factor of 25.4). There aren't actually any 3D printed parts required for this arrangement, although I included a printable drill guide to aid in the assembly. The tables are color-coded in Tinkercad to show which legs get cut and where they get reattached.
Materials required:
3 Lack tables
4 Dowel screws
8 Wood screws
12 blocks of scrap wood
https://www.tinkercad.com/things/1RohGqORfMU
This is an enclosure that will fit the Ender 3 Pro with the filament spool on the shelf below the printer. This has been drawn in millimeters to fit within the Tinkercad grid, but is actually in inches (scale up by a factor of 25.4). There aren't actually any 3D printed parts required for this arrangement, although I included a printable drill guide to aid in the assembly. The tables are color-coded in Tinkercad to show which legs get cut and where they get reattached.
Materials required:
3 Lack tables
4 Dowel screws
8 Wood screws
12 blocks of scrap wood
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
