Slicer Discord
Ladder Foot Pad – 3D-Druckmodell von Thingiverse Thingiverse

Ladder Foot Pad

von LJClark
5 Downloads
0 Likes
0 Makes
Zum Modell
This is a heavy duty foot pad for using a step ladder in softer ground. The overall pad is 150mm x 120 mm, and the socket for the ladder's feet is 80mm x 54mm. Depth of the socket is 20mm, and the overall thickness is 30mm,

I print these heavy; 0.30 layers with 5 layers top and bottom, and 5 perimeter layers. I use 40% infill, with a full layer every 20 layers. The little 2mm holes are there to add a more strength, since they have 5 layer perimeters too. They will weigh around 240 grams, or a little over 1/2 pound each.
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen