Lady Deadpool Variant Hueforge

Hueforge file of a Lady Deadpool variant. Enjoy!Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5PLA PolyLite Red Transmission Distance: 1.5PLA PolyLite Pro Light Red Transmission Distance: 1PLA BambuLab Basic Silver Transmission Distance: 0.5PLA BambuLab Basic Beige Transmission Distance: 8PLA PolyLite Cream Transmission Distance: 2This print uses 8 unique filaments Swap Instructions:Start with BlackAt layer #23 (1.04mm) swap to GrayAt layer #25 (1.12mm) swap to Jade WhiteAt layer #27 (1.2mm) swap to BlackAt layer #32 (1.4mm) swap to RedAt layer #35 (1.52mm) swap to Light RedAt layer #36 (1.56mm) swap to Jade WhiteAt layer #51 (2.16mm) swap to Silve