ladybug on leaves Hueforge

Project: coccinellaHere you can find all my HueForge creations and frame for 130x130mm , https://makerworld.com/en/@MicheleMM3D/collections/503504Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to BambuLab Green At layer #12 (1.04mm) swap to Jade White At layer #23 (1.92mm) swap to Red for the rest.