Lamp Base for WebCam Mount

This is a lamp base for my lamp [here](https://www.thingiverse.com/thing:6819693).

It uses this [webcam mount](https://www.amazon.co.uk/Tencro-Adjustable-Suspension-Logitech-Microphone/dp/B073HXVN5S?dib=eyJ2IjoiMSJ9.lhigA5TC0e0IxgDl2PwoIBiZOLG9zglYaZBGGVRNA_HvEe_jokR-x22O4CX1CzQBQ1CrrLEv2mBIJUtIgheK6i_yAL4NtOBvPB42iOzEZbm5uf_YhPceW7-pUpoSnPRBliaoQbL-opi8Sd_BUuKiKjmsjT3WQ1lpC_WbgBwdfwwbBnenseqzGAaYyL1C-eGOyj8KycuG2EL1OcsjPIq5dy7aNSv6bmYS_2uashVCwvw.er-VNBOHAO8YVXlmBFjPvD0DCPJAnMXDSlFWSMNKvNM&dib_tag=se&keywords=webcam+mount&qid=1730705809&sr=8-15) or any other mount with a ~12mm pin.

** Parts you'll need: **
* 1 m3 nut
* 1 m3 bolt
* About 400g of sand

** Instructions **
* Print with grid infill pattern. (Any repeating stackable pattern will do; you want the weight of the sand as close to the base as possible)
* Assuming a 0.2mm layer height, pause the print at layer 144 to insert the sand. Make sure to turn any cooling fans off.
* Assuming a 0.2mm layer height, pause the print at 242