Thingiverse
Lamp Base
por Jay_Omega
14
Descargas
12
Likes
0
Makes
Someone broke an important award in our house and used up all the glue on purpose.
This lamp base was made for a specific lamp, but should work for most small lamps.
Print the base 0.2 mm, whatever color you like. I chose natural.
Print the cover 0.2 mm, whatever color you like. I chose black.
Supports and rafts are not necessary.
Fill the base with plaster d'Paris to improve stability. You could also use concrete mix, candle wax, peanut brittle or Gallium.
Thread the lamp pipe (the threaded bit) through both the cover and base. Tighten the nut, aw heck isn't it obvious?
Display in a place of honor. Why yes indeed I made that!
This lamp base was made for a specific lamp, but should work for most small lamps.
Print the base 0.2 mm, whatever color you like. I chose natural.
Print the cover 0.2 mm, whatever color you like. I chose black.
Supports and rafts are not necessary.
Fill the base with plaster d'Paris to improve stability. You could also use concrete mix, candle wax, peanut brittle or Gallium.
Thread the lamp pipe (the threaded bit) through both the cover and base. Tighten the nut, aw heck isn't it obvious?
Display in a place of honor. Why yes indeed I made that!
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
