Lamshade enlightenment enhancer

I bought this set of 3 lampshades from Aliexpress a while ago, the longest one hides the bulb down low inside it producing a very narrow beam of light on the ground and the wire at the top wasn't centered.
I wanted to make it flood the room with its light so I made this extender and the wire aligner. You don't need to remove everything as I made a 6mm slot all the way on it's side to slide the wire in. Same goes for the aligners.
The extender was design for this particular E27 socket but it should work for others as long as the diameter is almost the same (the slot on the side allows the extender to be stretched a bit). The top of the extender is beveled to allow the shade to keep centered in the exact position you set it.