Laptop stand

In the office I use 2 external monitors in addition to my laptop. Because the height of each screen is different, however, the arrangement was not very ergonomic. For this reason, I have adapted the design from David Miao and made myself a stand for my Lenovo Thinkpad X1 Carbon.

I used a glued board made of beech. The dimensions can be found in the sketch. I wanted the wooden board to be flush with the 3D printed side parts. Therefore I milled off 5x8mm on 3 sides with a router.

In Prusa Slicer the STL file "laptopstand_modifier" can be loaded as modifier. The following setting is then made in this: Honeycomb infill with e.g. 8%, no bottom and top layers.