Thingiverse
Laptop tilt riser / vertical stand
par DyLaron
60
Téléchargements
51
Likes
2
Makes
For laptop computer. ranged from 11" to 15" screen size.
In the riser mode the hinge is raised to about 6" from the desk surface.
It's a design with two 3d-printed side plates, connected with 2 rods (bars, or tubes) of 0.5" diameter. (In the pictures I used a 0.75" plastic rod in an earlier prototype, it is an overkill, so I changed the model to half inch). You could choose to print out such a bar as well.
In the model there are bumps at the tip of the hook, for better holding the front end of laptop down. (not shown in my photos)
The two 'things files' are mirror image of each other. You can down both, or download one, and do the mirror in the slicing software.
In the riser mode the hinge is raised to about 6" from the desk surface.
It's a design with two 3d-printed side plates, connected with 2 rods (bars, or tubes) of 0.5" diameter. (In the pictures I used a 0.75" plastic rod in an earlier prototype, it is an overkill, so I changed the model to half inch). You could choose to print out such a bar as well.
In the model there are bumps at the tip of the hook, for better holding the front end of laptop down. (not shown in my photos)
The two 'things files' are mirror image of each other. You can down both, or download one, and do the mirror in the slicing software.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
