Large Chuck Glider

I modified @Orion3DStudios “Easy Print Glider” to be larger, while maintaining a combination of lightness and structural rigidity. I also made some adjustments to the leading edge of the wings and increased the elevator angle, which I found to improve its gliding characteristics. See It In Action!Hand Tossed Dropped from an RC plane Dropped from an RC helicopter Pulled behind an RC plane I included the Fusion 360 source file and a STEP file if you want to modify further.I found using these print settings gave me a good balance of light weight and durability:0.5mm line widthFirst layer set to 0.1mmOther layers 0.2mm2 bottom layers3 top layersRectilinear infill, 7%Monotonic line top and bottom fill1 wallPrinted with PLA+, which gives a good combination of stiffness and durability. I believe PETG may be too flexible for this.Note: you need to add nose weight to the plane for it to glide. This will vary depending on how you print the plane. For mine, I needed 8.5 grams of nose weight and m